英语
西班牙语
阿拉伯语Precautions when using aluminum alloy vents
1. Magnesium oxide and magnesium chloride used in the processing of aluminum alloy vents should be properly stored, pay attention to fire prevention and not be exposed to direct sunlight. The useless magnesium oxide, magnesium chloride and material packaging containers should not be thrown away or incinerated at will, and should be piled up for disposal.
2.When manufacturing aluminum alloy vents on site, install electric fans or fans at 1--2 meters apart from the cut channel to blow the dust generated during the cutting to an open area with relatively good ventilation, and reduce the dust produced by the personnel. The inhalation and the effect on vision.
3. For the transfer of aluminum alloy vents, suitable labor should be arranged according to the volume and weight of different pipe sections. The processing site conditions allow it to be transported by flatbed trucks. Multi-person transfer of aluminum alloy tuyere must work hard together, handle it gently, and stack it up neatly.
4. During the processing, dust or fiber flying will occur in the aluminum alloy vents. The personnel who cut the aluminum vents on site must wear dust-proof goggles and masks to avoid inhalation of the fine dust generated during the cutting.
