The access panel is a building component used to facilitate access to mechanical and electrical systems. These devices can be installed on the wall or ceiling to maintain and repair the plumbing system, wires, pipes and other equipment in the building. Different types of panels can be installed during construction or added later in retrofit applications. The manholes with drilled manholes can be classified according to the material of each manhole. Steel and aluminum parts are the most common, especially in commercial applications. Plastic or vinyl devices can also be used, and these panels can be pre-treated by the manufacturer or painted during installation to match the surrounding decoration. Some types of access panels even come with decorative finishes and may have molded panels similar to doors. Some access panels include special features such as blinds or locks. A simple twist lock is usually used to keep the panel closed, and when safety is a major issue, a cylinder lock with a key is added. Most types of access panel units have standard sizes, but custom panels are also available. One of the most important criteria for comparing different types of access panels is the fire rating of each panel. When installed on a fire partition or ceiling, the access panel must be equipped with a label showing its fire rating. These labels certify that the panel has undergone a burn test for a specific period of time. The panel should have the same fire rating as the surrounding walls or ceiling. When installing these panels, builders can choose from several different technologies. Some models do not require fasteners and can be inserted directly into a hole in the drywall, while other models must be fixed with screws. All access panels must be slightly smaller than The wall is open to provide sufficient clearance between the panel and the frame. The access panel can be surface mounted or embedded in the wall, depending on the preference of the builder or homeowner. These panels can consist of single-leaf or double-leaf openings, and can be opened to the user or inwardly towards the wall. When used in external openings, the installer should use an access panel that can withstand rain, wind and other components. Galvanized or stainless steel devices can withstand rust and corrosion, and should be equipped with drip caps and washers to keep electrical and mechanical components dry and protected.
Related Suggestion : SA-AP320 Sliding Open Aluminum Access Panel