How to remove the bathtub maintenance port?

1. There is a hole 30 cm high and 40 cm wide at the water outlet. Cut a hole according to the size, and cut out the waterproof and anti-corrosion treated wooden board (thickness 40 mm) according to the size, and use the calculated number and arrangement of bricks on the board. Construction glue attaches the bricks to the planks. Apply sealant to the edge of the protruding brick and set it on the box.

2. When building the bathtub skirt, for the sake of aesthetics, a height of 60 cm is reserved, and other materials such as mosaic are abandoned. The bathtub skirt uses the same bricks as the lower part of the wall tiles. The skirts are all one color and one material, very beautiful.
3. When installing a skirted bathtub, the bottom of the skirt should be close to the ground, and 25 to 30 cm holes should be reserved in the drainage area of ​​the floor to facilitate the installation of drainage. An inspection hole should be set on the wall at the drainage end of the bathtub. Available in a variety of colors, styles and shapes, they are effective against moisture and are extremely durable and easy to clean. The disadvantage is that it is easy to slip when exposed to water, so choose a tile with a non-slip coating to pave the ground. When installing, fill the seams with grout so that they can be easily scrubbed in the future and will not be damaged too quickly.