英语
西班牙语
阿拉伯语1. Soft cloth and towel are suitable for scrubbing tools. It is strictly forbidden to use corundum powder, sandpaper, wire brush or other frictional objects to scrub the surface of aluminum materials.
2. It is strictly forbidden for the aluminum access panel to be loosely loaded during shipment, causing bumps.
3. When the surface of the aluminum access panel is eroded and polluted, it should be cleaned in time. The dirt can be wiped with a soft cloth first with alcohol or perfumed glue (scrubbing with alcohol first, if not, consider using perfumed glue), and then use water. wash.
4. It should be cleaned with warm water containing lubricant or neutral cleaning agent. Acid or alkaline cleaning agent is not allowed.
5. Soft cloth and towel are suitable for scrubbing tools. It is strictly forbidden to use corundum powder, sandpaper, wire brush or other frictional objects to scrub the surface of the aluminum access panel.
6. For the cleaned aluminum-aluminum access panel, it is best to use high-quality topcoat protective wax to polish the anodized film, or evenly spray a layer of acrylic-based varnish.
7. According to the environment of use, the aluminum access panel should be regularly cleaned of pollutants to maintain brightness.
