1. Size. The reserved holes for drainage by real estate developers are relatively large when the house is handed over, and they need to be repaired by decoration personnel. Many consumers choose floor drains at the end of the decoration according to the size of the drainage outlet that has been repaired by the decoration team, but the floor drains on the market are all standard sizes, so it often happens that they cannot choose satisfactory products. Therefore, consumers are reminded that they should choose their favorite floor drain at the design stage of decoration, and then construct the drainage outlet according to the size of the floor drain. In addition, the opening diameter of the floor drain grating should be controlled between 6-8mm to prevent hair, sludge, sand and other dirt from entering the floor drain.

2. It should be grasped that the water inlet of the multi-channel floor drain should not be too much. The multi-channel floor drain is a product developed in recent years. A body usually has 3 to 4 water inlets (undertaking the washbasin, bathtub, washing machine and ground drainage). This structure not only affects the drainage volume of the floor drain, but also does not conform to the actual design situation. . Therefore, the water inlet of the multi-channel floor drain should not be too many, and there are two (ground and bathtub or ground and washing machine) to meet the needs.

SS-FD01 Rectangular Linear Shower Floor Drain

3. The choice of floor drain should pay attention to the reasonable structure and easy cleaning. Reasonable structure requires that the depth of the water seal must be more than 5 cm. It is easy to clean because the floor drain removes ground water, which often contains hair and fibers. In use, the water seal must be prevented from drying out, and water should be injected regularly. If you are going to travel for a long time, it is best to seal the floor drain with a lid.

4. The specifications of deep water seals and floor drains are different according to the brand, so the depth is also different. Most of the square panels are 10cm*10cm; the depth is 12cm~14cm, the pipe diameter is 50, and the inner diameter is 5cm. 4.5cm.